beautypg.com

5ws_rev2, Fixture installation guide – Besa Lighting Paolo (Vanity) User Manual

Page 4

background image

Use With

these Models:
• 5WS Alex

(7735xx)

• 5WS Ciro

(7738xx)

• 5WS Paolo

(7873xx)

All electrical connections and the installation of this fixture must be in agreement with local codes,

ordinances or the NEC (National Electric Code) or CEC (Canadian Electrical Code).

Do not connect this fixture to an electrical system that does not provide a means for equipment grounding.

FIXTURE INSTALLATION GUIDE

Models 5WS Series (Five Light Vanity 120V)

5WS, Rev.2 2-09

Caution: Turn off power to electrical box before installing

6695 Taylor Rd. Blacklick, OH 43004

www.besalighting.com

GLASS INSTALLATION:

Angle the Glass Diffuser and position the bottom

into the Glassholder (H) as shown, then rotate the

upper portion into the glassholder. If the glass does

not seat properly, then the socket wires may be

conflicting with the glass neck. Gently move the

wires out of the way, then reinsert the glass.

Once the Glassholder is properly seated,

secure with the Retaining Screw (I).

DO NOT OVERTIGHTEN THE RETAINING SCREW.
NOTE:
Glass Diffuser shown is for example

purposes, the actual Glass Diffuser may be

different in appearance.

I

H

1. Carefully remove parts from package.

2. Remove the two Cap Nuts(A) to release the Canopy from the Mounting Bracket(B).

3. If desired, the Canopy can be offset by 7/8” in each direction. Loosen the two hex nuts on the

back of the canopy, reposition the canopy to the desired location, then retighten the hex nuts.

4. Attach the Mounting Bracket to the Outlet Box (C) with two Machine Screws (D) provided.

5. Connect the electrical leads from the fixture to the house supply wires, black to black and

white to white, and secure with wirenuts provided (E). Connect the House Ground Wire to

the Bare Copper Lead from the fixture, and secure with wirenut provided (F).

6. Align the circular openings on the Backplate with the Threaded Posts (G) on the

Mounting Plate. Push the Canopy over the Threaded Posts until the Canopy is flush

with the wall, then secure with the Cap Nuts.

7. With the power still off, insert bulb of not more than the labeled wattage. Install glass diffusers.

A

B

C

D

E

F

G