To367_rev5, Ceiling fixture installation guide – Besa Lighting Trio (Flush Mount) User Manual
Page 4
![background image](https://www.manualsdir.com/files/775321/content/doc004.png)
6695 Taylor Rd. Blacklick, OH 43004
www.besalighting.com
CEILING FIXTURE INSTALLATION GUIDE
Models using TO367 Series (Med. Base 120V)
TO367, Rev.5 6-10
Use With
these Models:
• Trio 12
(9682xx)
Caution: Turn off power to electrical box before installing
CAUTION-RISK OF FIRE: Min 90C SUPPLY CONDUCTORS. This fixture requires that the branch supply wires
be rated: MIN 90C. Most dwellings built before 1985 have supply wire rated 60C.
CONSULT A QUALIFIED ELECTRICIAN TO ENSURE CORRECT BRANCH CIRCUIT CONDUCTOR.
All electrical connections and the installation of this fixture must be in agreement with local codes,
ordinances or the NEC (National Electric Code) or CEC (Canadian Electrical Code).
Do not connect this fixture to an electrical system that does not provide a means for equipment grounding.
1. Carefully unpack parts. Fasten Mounting Strap (A) to Outlet box with Machine Screws (B).
2. Thread the Threaded Nipple (C) into the Mounting Strap as shown.
3. Connect bare Ground Wires from fixture and Strap to supply ground with wire nut connector (D).
4. Connect the fixture conductors to the supply conductors with wire nut connectors (E) as shown:
White fixture wires to white supply wire and black fixture wires to black supply wire. Carefully
push wires and wire nuts back into outlet box.
5. Place the fixture Canopy (F) over the outlet box so that the Threaded Studs protrudes
through the two mounting holes in canopy.
6. Secure the Canopy to the ceiling with the Star Washer (G) and Cap Nut (H), as shown.
Tighten the cap nut firmly by using Pliers.
7. Insert screw-in incandescent bulb(s) into socket at wattage no greater than marked on the
fixture label
MAX 100W Type A 120V.
8. To attach Glass Diffuser, seat the Glass Rim (I) into the slots of the two Fixed Glass Knobs (J).
Then lift up the glass to the Adjustable Glass Knob (K) and tighten Adjusting Screw (L) until the
rim of glass positioned fully into the slot.
DO NOT OVERTIGHTEN.
9. Restore power.
A
B
D
E
F
G
H
I
J
C
K
L
- Spezza (Flush Mount) Metro (Sconces) Groove (Mini Sconces) Jodi (Vanity) Copa 3 (Mini Sconces) Nico 4 (Mini Sconces) Palla 5 (Mini Sconces) Tay Tay (Mini Sconces) Divi (Mini Sconces) Mia (Mini Sconces) Peri (Mini Sconces) Hoppi (Mini Sconces) Lasso (Mini Sconces) Domi (Mini Sconces) Brella (Mini Sconces) Canto 5 (Mini Sconces) Kani (Mini Sconces) Kona (Mini Sconces) Pahu 4 (Mini Sconces) Sabrina (Mini Sconces) Focus (Mini Sconces) Spezza 7 (Mini Sconces) Karli (Mini Sconces) Aero (Vanity) Baaz (Vanity) Jamie (Vanity) Darci (Vanity) Bolla (Mini Sconces) Sasha II (Mini Sconces) Rise (Mini Sconces) Falla 6 (Mini Sconces) Optos (Sconces) Pahu 4 (Vanity) Nico 4 (Vanity) Copa 3 (Vanity) Palla 5 (Vanity) Tay Tay (Vanity) Divi (Vanity) Mia (Vanity) Peri (Vanity) Hoppi (Vanity) Lasso (Vanity) Domi (Vanity) Brella (Vanity) Canto 5 (Vanity) Kani (Vanity) Kona (Vanity) Sabrina (Vanity) Groove (Vanity) Focus (Vanity) Luma Slim (Flush Mount) Nova (Flush Mount) Ring (Flush Mount) Slipstream Slim (Flush Mount) Glitter (Flush Mount) Pinta (Flush Mount) Wave (Flush Mount)