Besa Lighting Pogo (Mini Pendants 12V) - Manual (Page 6)

Install Spacer and then lower the Spacer onto
the Inner Glass Shade. Spacer should fit through
the Inner Glass Shade opening and rest on the
top of the Check Ring.
Prior to installing onto the Pendant Cord, thread
the Threaded Nipple into the Decorative Cap
completely. Install the Decorative Cap/Threaded
Nipple. Lower and thread the Decorative Cap/
Threaded Nipple until the Decorative Cap rests
securely onto the top of the Outer Glass Shade.
Decorative Cap
Threaded Nipple
All electrical connections and the installation of this fixture must be in agreement with local codes,
ordinances or the NEC (National Electric Code) or CEC (Canadian Electrical Code).
Do not connect this fixture to an electrical system that does not provide a means for equipment grounding.
IMPORTANT: for installation of pendants and wiring, please refer
to the FIXTURE INSTALLATION GUIDE included with fixture canopy
GLASS SHADE INSTALLATION GUIDE
Use With
these Models:
• Pogo
(4293xx)
Prior to installing the Pendant Cord onto the
Canopy, thread on the Check Ring completely.
Install the Inner Glass Shade by lowering onto
the Check Ring.
6695 Taylor Rd. Blacklick, OH 43004
www.besalighting.com
Check Ring
Spacer
Inner Glass Shade
Pendant Cord
Inner
Glass
Shade
Install Outer Glass Shade then carefully lower
the Outer Glass Shade until it rests on the Spacer.
Spacer
Outer
Glass Shade
Inner
Glass
Shade
IMPORTANT:
Do not install onto canopy
until all glass and hardware
is installed completely.