Besa Lighting Pera 6 (120V Pendants) - Manual (Page 3)

GLASS SHADE INSTALLATION GUIDE
Model B Series -03 (E12 Base Pendant Set 120V)
Q Series -03 (G9 Base Pendant Set 120V)
BKIT.03, Rev.5 12-11
IMPORTANT: For installation of pendants and wiring, please refer
to the Fixture Installation Guide included with fixture canopy
6695 Taylor Rd. Blacklick, OH 43004
www.besalighting.com
2. Restore power.
1. Secure Glass Shade per the diagram above, then install bulb per label on luminaire.
IMPORTANT: For glass with a closed bottom, the lamp must be installed prior to installation of the glass.
The Center Hub Support must be installed
prior to installing cord into the ceiling canopy.
Install the glass shade by positioning
over the lampholder and then threading
the Decorative Posts into the Center
Hub Support.
Decorative Sleeve, must be installed
prior to installing cord into the ceiling canopy.
Note: Glass Shade is for
instructional purposes.
Actual Glass Shade may vary
in size and shape.
Use With
these Models:
• Tutu
(4121xx)
• Pera 6
(1713xx)
• Copa
(4930xx)
Replacement parts for this 120V Voltage Pendant Set are as follows:
#TB310C50-SN.03 - 50W 10’ clear cordset with Nickel Hardware
#TQ310C40-SN.03 (lamp included) - 40W 10’ clear cordset with Nickel Hardware
For Bronze cordset, use “Z” in place of “C” and “BR” in place of “SN”. For 15’
cordset, use “315” in place of “310”
Lamps Only
#B5513 - 40W G9 Halogen, 120V
All electrical connections and the installation of this fixture must be in agreement with local codes,
ordinances or the NEC (National Electric Code) or CEC (Canadian Electrical Code).
Do not connect this fixture to an electrical system that does not provide a means for equipment grounding.