Belshaw Adamatic Type F Cake Donut Depositor - Manual (Page 26)

Belshaw Adamatic Bakery Group  [email protected]  Phone 206-322-5474  Fax 206-322-5425
Donut Cutter Type F TS MN-1533EN 11
Adjustments
Adjusting the Verticality
If the donuts do not drop straight or separate
from the cutter evenly, the cutter may not be
level.
To make minor adjustments in the verticality of
the machine, you do not need to re-mount the
wall plate or the column; you can simply adjust
the pivot hinge by changing the setting of the
pivot hinge-adjusting pin.
To adjust the verticality of the machine (see
Figure 2-1):
1. Turn off and unplug the machine.
WARNING
To avoid being seriously injured or
electrocuted, turn off and unplug the
machine before making adjustments.
2. Thread the pivot hinge adjusting pin in or
out:
 Thread the pin out to move the vertical
axis of the cutter counterclockwise
 Thread the pin in to move the vertical
axis of the cutter clockwise
Figure 2.1. Adjusting the Verticality of the Machine
Pivot arm pivot hinge adjusting pin
Pivot
hinge Pivot
arm pin