Belshaw Adamatic Type F Cake Donut Depositor - Manual (Page 22)

Belshaw Adamatic Bakery Group  [email protected]  Phone 206-322-5474  Fax 206-322-5425
Donut Cutter Type F TS MN-1533EN 7
2 Troubleshooting
If you have a problem with your Type F
Donut Cutter that you cannot solve, call your
dealer or another qualified technician.
If your dealer cannot help you, please call
Belshaw. To do so, first dial the appropriate
international access code, then (206) 322-5474
(United States). When you call, please specify
the following:
 The model name of the machine.
 The serial number of the machine.
 The voltage, phase, and cycle of the machine.
CAUTION
If you perform repairs yourself or have
them performed by anyone other than a
service technician authorized by Belshaw
Bros., you do so at your own risk.
Following is a troubleshooting question and
answer to help you identify and solve some basic
problems.
Heed all warnings listed below. These warnings
when followed will help ensure your safety.
WARNING
Disconnect the machine from the power
source before disassembling, repairing, or
wiring.
WARNING
To avoid serious injury, before doing any
service to the cutter, turn off the cutter,
disconnect it from the power source, and
swing it away from over the fryer.