Avery Dennison SNAP 500 Operator Guide - Manual (Page 30)

30 Operator’s Guide—SNAP™ 500
4.3 Lubrication
The SNAP 500 ball bearings do not require lubrication.
Two (2) oil-impregnated bronze bushings in the auxiliary rollers of the feed assembly that do
require lubrication.
Caution: AVERY DENNISON recommends lubricating the bronze
bushings with one drop of multi-use oil once every month
during normal operation.
4.4 Rotary Knife Assembly Cleaning
WARNING: When adjusting, removing, or replacing the knife assembly,
you must turn off the power to the printer to avoid personal injury.
1. Turn off the power to the printer.
2. Using the Feed Roller knob, back the tape out of the
knife.