Avery Dennison SNAP 500 Operator Guide - Manual (Page 16)

16 Operator’s Guide—SNAP™ 500
2.3 Printing Labels
2.3.1 Printer Control Panel
• The Start/Stop Button is a blue button.
o Data light is on, pressing the Start/Stop Button starts printing.
o If the printer is running, pressing the Start/Stop Button stops printing.
• The Ready Light is a green light -> ready to accept print jobs.
• The Data Light green light -> labels are ready to print.
o If the Data Light is flashing, you are at “end of day”
• The Supply Light is a yellow light:
o tape or ink supply needs attention
o stacker is full.
o flashes when sensor being used.
o displays a problem with an accessory attached.
• The Error Light is a red light -> problem exists
• The Voice Button is a yellow button -> printer status