beautypg.com

2 print head replacement – Avery Dennison SNAP 500 Operator Guide User Manual

Page 28

background image

28

Operator’s Guide—SNAP™ 500

4.2 Print Head Replacement

Replace head when:

• Voids in the printing

• Lines of missing print

• Print quality does not improve after cleaning

1.

Turn off the power to the printer.

2. Remove the tape and ink supplies from the printer

for easier print head removal.

3. Follow handling techniques listed above.

4. Unplug the cables that connect to the print head.

5. Press the two grey tabs on the top of the print station.

Reach underneath and remove the print head from the
print station.

See also other documents in the category Avery Dennison Equipment: