Avery Dennison SNAP 500 Operator Guide - Manual (Page 27)

User’s Manual—SNAP™ 500 27
4.0 Maintenance
4.1 Print Heads
NOTE: Clean print heads:
1. Every 2-4 hours with alcohol and a cotton pad
2. Every 8 hours with alcohol and Velcro.
4.1.1 Handling Print heads
1. Keep print heads in their original anti-static bags.
2. Wear an anti-static wrist strap. Fasten the clip end of
the anti-static wrist strap to a metal portion of the
printer.
3. Wear anti-static gloves.
4. Do not touch any terminals extending from the print
head or the print line.
4.1.2 Cleaning Procedures
1. Before cleaning any part of your SNAP 500 printer, turn
off the power.
2. Apply alcohol to pad
3. Scrub head with pad.
4. Apply alcohol to loop side of a Velcro.
5. Scrub firmly with Velcro. Let dry 5 minutes.
6. Clean the print rollers.
7. Clean sensors with a dry cotton or foam swab.
CAUTION: Do not use alcohol to clean sensors.