Avery Dennison SNAP 500 Operator Guide - Manual (Page 19)

User’s Manual—SNAP™ 500 19
3.0 Making Adjustments
3.1 Print Head Adjustments
3.1.1 Adjusting Print Head Pressure
CAUTION: For extended print head life, use the lighter print pressure
setting whenever possible.
1. For stock < 25mm, use a flat blade screwdriver to depress both buttons and turn them ¼
turn (90 degrees) counterclockwise until they are in the upper position.
2. For stock >25mm and < 50mm, use the flat blade screwdriver to depress both buttons
and turn them clockwise until they are in the lower position.
CAUTION: Ensure that both buttons on the print head are in the same
position. These are the only two positions for the buttons.
< 25mm > 25mm