beautypg.com

2 load stock – Avery Dennison SNAP 500 Operator Guide User Manual

Page 10

background image

10

Operator’s Guide—SNAP™ 500

2.2.2 Load Stock

1. Remove packaging from stock and discard.

2. Cut off tape holding the end of the stock.

3. Rotate the Stock Arbor Knob

counterclockwise to retract the
“fingers”. Open wider than width of the
stock.

4. Slide stock on with the top edge pulling

towards the stacker.

5. Rotate the Stock Arbor Knob

clockwise quickly to extend the fingers
that hold the stock.