Avery Dennison ALX 924 Setup Manual - Manual (Page 6)

06/06 Rev. 3.05-01 OPERATING MANUAL Setup
ALX 92x
6
Inserting label material
Removing spent backing paper
The backing paper rewinder can exactly
rewind the amount of backing paper remai-
ning from a material roll with 300 mm dia-
meter [2A].
Assuming backing paper has gathered on
the rewinder:
1. Pull out the release button [2B].
The tensioning mechanism of the rewinder
is slackened.
2. Remove the rewound backing paper.
Removing glue residue
« If necessary, clean the following compo-
nents:
•
Printhead
• Dispensing plate
• Deflection rollers
• Drive roller
•
Pressure rollers
P Follow the directions provided in topic sec-
tion
Maintenance and Cleaning .
WARNING!
• Rotating parts can trap items and
draw them in!
« When working on the device, do
not wear loose jewellery, long
sleeves, long hair, and similar.
« Close the devices cover before
printing.
•
During operation, the printhead
can become hot.
« Be careful when touching the
printhead!
CAUTION! - A backing paper roll
exceeding the diameter limit can
stall and damage the machine!
« Always remove the backing paper
from the rewinder if you insert a
new material roll!
[1] Rewound backing paper on the ALX 92x (A).
A
[2] Removing rewound backing paper.
A Backing paper roll
B Release button
A
B