Avery Dennison Monarch 9864 Advanced Applications - Manual (Page 9)

06/08 Rev. AB USER MANUAL Advanced Applications
9854 & 9864
9
Setting the IP Parameters
The IP parameter settings can either be fixed, or they can be requested from
a DHCP server every time the printer is turned on. The DHCP server provides
a name for the printer on request, which consists of a combination of printer
type + 3 digits from the MAC address. (e.g. 9854___300dpi_020049).
The following values are preset:
– IP address: 192.168.1.99
– Net mask: 255.255.255.0
– Default gateway: 0.0.0.0
¯ Connection to a name server is not required.
¯ WARNING: Ask your network administrator for assistance to assign IP
addresses.
Sending Data Using a TCP Server
You can send data using a TCP/IP server (port number > 1024).
This protocol is supported by
•
Unix
•
Windows 2000 or Windows XP
You can set the port address in the printer’s parameter menu:
Menu Parameter Description
INTERF. PARAM. >
NETWORK PARAM.
IP addressassign Set to “fixed IP address” or
“DHCP.”
IP address
Net mask
Gateway address IP parameter input fields,
when “fixed IP address” is
the addressassign type.
[Tab. 7] Setting the IP parameters in the printer menu
Menu Parameter Description
INTERF. PARAM.
>
NETWORK PARAM.
Port address Select the port number (1024-65535).
INTERF. PARAM.
>EASYPLUGINTERPR Interface Set a TCP/IP socket.
[Tab. 8] Setting the port address in the printer´s parameter menu