Avery Dennison Monarch 9860 Quick Reference - Manual (Page 6)

9. Align the ribbon and make sure it is straight and centered
throughout the path.
10. Tape the ribbon to the take-up core. Do not tape the
ribbon to the take-up reel.
11. Rotate the take-up core until the leader is past the
printhead.
12. Remove any slack in the ribbon by turning the take-up reel
clockwise.
13. Hold the printhead assembly by the printhead tab while
pressing down on the printhead release.
14. Close the printhead by pressing down on the thumb well
until you hear it click into place. Close the cover.
P r i n t i n g
Before you print, make sure the printer is connected and ready
to receive data.
1. Turn on the printer. The printer is ready to receive and
print batches when you see “PRINT MODE Ready” on the
keyboard.
2. Download a format and a batch. Refer to the optional
Packet Reference Manual for information on downloading
print jobs.
3. The printer prints the format.
4. Remove the printed supply. If the printer will be unused
for extended periods of time, we recommend leaving the
printhead unlatched.
C l e a r i n g J a m s
When you are printing and a jam occurs, an error appears on
the keyboard.
1. Turn off the printer and open the cover and printhead
assembly.
2. If necessary, remove the supply roll and ribbon.
3. Remove the jammed supply and reload the supply roll.
4. Close the printhead assembly and turn on the printer.
5. On the keyboard, press Feed (F) to position the supply
under the printhead.
6