Avery Dennison Monarch 9860 Quick Reference - Manual (Page 2)

L o a d i n g T a g s o r L a b e l s
1. Open the cover.
2. Unlock the printhead by turning the retaining latch.
3. Lift printhead assembly using the printhead tab until the
assembly locks into place.
4. Place the roll of supply on the supply holder. For tags,
make sure the supply unrolls from the bottom, because
tag rolls are wound face in. For labels, the supply unrolls
from the top or the bottom. Do not pick up the printer
by the supply holder.
5. Adjust the supply holder guides so the sides barely touch
the roll. Make sure the supply roll turns freely.
2