Avalon Firestyles DVS Cypress Face - Manual (Page 4)

DVS Cypress Face
Installation Instructions
(SKU 95200257)
Page 4 of 17 17601684 — 10/3/12 © Travis Industries, Inc.
6. Attach the LED assembly to the LED bracket with nuts removed earlier as shown below.
7. Attach the LED bracket as shown below, using the nuts and star washer removed earlier.
NOTE: Make sure that both brackets are in place before installing. When attaching the right side
nuts on the hinge bracket, place the ground wire connection and star washer over the stud before
installing the nut.
8. Attach the power cord harness to the power cord and route the quick‐connects through the hole in
the right side of the insert.
NOTE: Make sure to use the rear hole.