Artesyn RTM-ATCA-7350 Installation and Use (September 2014) - Manual (Page 63)

Functional Description
RTM-ATCA-7350 Installation and Use (6806800H30G) 63
The following table lists the two network port indicators provided by the GE daughter card.
4.3.2 FC Daughter Card
The FC daughter card provides two 2G FC interfaces; FC-AL, FC-SW, point to point, and 1G/2G
auto-negotiation. The RTM-ATCA-7350 can host one FC daughter card. Use of the FC daughter
card excludes use of the GE daughter card.
Optical modules are used to provide the optical interfaces at the face plate. See Connecting
Optical Fibers on page 44 for installing the optical modules. Optical modules for the FC
daughter card must be obtained separately. Recommended modules are FINISAR
FTRJ8519P1BNL-HW. FINISAR FTRJ8519P2BNL-HW.
Table 4-1 Indicators Provided by the GE Daughter Card
Indicator Color Meaning Description
Network port indicator Green Network port working
state  Off: The network port does
not work.
 Green on: The network port is
in Link state.
 Amber blinking: The network
port is in Active state and is
transmitting data.
Amber