Artesyn RTM-ATCA-7350 Installation and Use (September 2014) - Manual (Page 22)

Hardware Preparation and Installation
RTM-ATCA-7350 Installation and Use (6806800H30G) 22
2.4 Module Installation and Removal
Note the following points at the time of installing RTM-ATCA-7350:
 Make sure that you wear an electrostatic discharge (ESD)-preventive wrist strap to prevent
the static electricity from hurting you or damaging the device.
 Keep your personal objects such as your clothes away from RTM-ATCA-7350. To prevent
the static electricity on clothing, you need to put on antistatic clothing.
Personal Injury
Power and communication cables
Touching power and communication cables that are energized may cause injuries.
Make sure that the cables cannot be touched while the product is operating.
Damage of Circuits
Electrostatic discharge and incorrect installation and removal of the product can damage
circuits or shorten their life.
Before touching the product or electronic components, make sure that your are working in an
ESD-safe environment.
Module Damage
If the blade is not fully aligned with the interface in the backplane, too much force may twist the
pins on the blade or backplane.
Do not exert too much force when you insert the blade.