Artesyn RTM-ATCA-7350 Installation and Use (September 2014) - Manual (Page 29)

Hardware Preparation and Installation
RTM-ATCA-7350 Installation and Use (6806800H30G) 29
Note the following points at the time of installing or replacing components:
 Make sure that you wear an electrostatic discharge (ESD)-preventive wrist strap to prevent
the static electricity from hurting you or damaging the device.
 Keep the area where the components reside clean and keep the components away from
the heat-generating devices, such as radiators.
 Ensure that your sleeves are tightened or rolled up above the elbow. For safety purpose, it
is not recommended to wear jewelry, watch, glasses with metal frame, or clothes with
metal buttons.
 Do not exert too much force, or insert or remove the components forcibly. Avoid damage
to the components or plug-ins, for example, the pins are bent or get short circuit.
2.6.2 Preparations
Before you install or replace a component, make the following preparations
 Confirming the feasibility of the operation
– There are available spare parts of the component to be installed or replaced in the
equipment warehouse. When the available spare parts are in short supply, contact
Artesyn technical support for help in time.
– Make sure that the new component is in good condition, without defects such as
oxidation, chemical corrosion, missing component, or transportation damage.
– By reading this document, you are familiar with how to install and replace the
component and master the skills required by the operation.
 Checking the environment
Make sure that the shelf, power supply, temperature, and humidity meet the operating
requirements of the blades and components. For details, refer to ATCA-7350 Installation
and Use Manual and other related documents.
 Preparing spare parts and tools
– Prepare the component to be installed or replaced.
When you hold or transport the component, use the special antistatic package. In
addition, you need to tidy, record, and repair the component during routine
maintenance.