Artesyn RTM-ATCA-7350 Installation and Use (September 2014) - Manual (Page 15)

Chapter 1
RTM-ATCA-7350 Installation and Use (6806800H30G) 15
Introduction
1.1 Overview of RTM-ATCA-7350
The ATCA-7350 Rear Transition Module (RTM) of the server blade (hereinafter referred to as
RTM-ATCA-7350) must work with the server blade ATCA-7350. RTM-ATCA-7350 provides
external interfaces for the connected server blade.
RTM-ATCA-7350 provides the following functions:
 RTM-ATCA-7350 provides two daughter card connectors. RTM-ATCA-7350 supports the
following daughter cards:
– Gigabit Ethernet (GE) daughter card
– Fiber Channel (FC) daughter card
The daughter cards provide external interfaces for the server blade.
 As a manageable module of the server blade, RTM-ATCA-7350 is managed by the
Intelligent Platform Management Controller (IPMC) of the server blade.
 The IPMC monitors the working status of RTM-ATCA-7350. In addition, the Field
Replaceable Unit (FRU) data is stored in the EEPROMs on the RTM itself and the daughter
cards.
1.2 Mechanical Data
The following table lists the mechanical specifications of RTM-ATCA-7350.
Table 1-1 Mechanical Specifications of RTM-ATCA-7350
Item Specification
Maximum weight 0.76 kg
Length x width x height 322.3 mm x 70 mm x 29 mm