Artesyn COMX-CAR-210 Installation and Use (August 2014) - Manual (Page 60)

Functional Description
COMX-CAR-210 Installation and Use (6806800L14D) 60
4.8.1 SATA
The board supports four SATA ports. Two seven pin vertical headers, one SATA port with right-
angle 22-pin Power Data connector that supports a JEDEC MO-297A Slim-Lite, and one 22-pin
standard vertical power plus SATA connector.
The following table describes the group signals used by each pin.
For more information, see Chapter 3, SATA, on page 38
4.8.2 IDE
The board provides a 44-pin mini-IDE socket and a jumper to set the Master/Slave mode.
For information on the pin assignment and jumper settings, see Chapter 3, IDE, on page 39
4.8.3 CF Card
The board provides a CF card socket which can support both Type I and Type II cards.
For information on the pin assignment and jumper settings, see Chapter 3, CF Card, on page 40 .
4.9 Super I/O
The COMX-CAR-210 provides a Super I/O for extending several function modules.
Pin Group signals
j14 SATA0
J11 SATA1
J12 SATA2
P38 SATA3