beautypg.com

6 spi flash, Table 3-41, P47, sf100 header pin-out – Artesyn COMX-CAR-210 Installation and Use (August 2014) User Manual

Page 50: Table 3-42, P46, spi flash configuration, Table 3-43, P12, bios configuration on the module, Table 3-44, P43, bios configuration on the module, Controls, leds, and connectors

background image

Controls, LEDs, and Connectors

COMX-CAR-210 Installation and Use (6806800L14D)

50

3.5.6

SPI Flash

Table 3-41 P47, SF100 Header Pin-out

Pin

Signal

1

3.3V

2

GND

3

SPI_CS_N

4

SF_SPI_CLK

5

SF_SPI_SO

6

SF_SPI_SI

7

NC

8

NC

Table 3-42 P46, SPI Flash Configuration

Jumper setting

Configuration

P46 (1-2)

Enable SPI flash chip U9 and disable U10
(Default)

P46 (2-3 )

Enable SPI flash chip U10 and disable U9

Table 3-43 P12, BIOS Configuration on the module

Jumper setting

Configuration

P12 (1-2)

Enable CS0 of BIOS on the Module (Default)

P12 (2-3)

Disable CS0 of BIOS on the Module

Table 3-44 P43, BIOS Configuration on the module

Jumper setting

Configuration

P43 (1-2)

Enable CS1 of BIOS on the Module (Default)

P43 (2-3)

Disable CS1 of BIOS on the Module

See also other documents in the category Artesyn Equipment: