Artesyn COMX-CAR-210 Installation and Use (August 2014) - Manual (Page 21)

Chapter 2
COMX-CAR-210 Installation and Use (6806800L14D) 21
Hardware Preparation and Installation
2.1 Environmental and Power Requirements
The following table lists the environmentl requirments that the board must meet when
operated in your particular system configuration.
2.1.1 Environmental Requirements
Operating temperatures refer to the temperature of the air circulating around the board and
not to the component temperature.
Product Damage
High humidity and condensation on surfaces causes short circuits.
Do not operate the system outside the specified environmental limits. Make sure the prod-
uct is completely dry and there is no moisture on any surface before applying power.
Table 2-1 Environmental Requirements
Environmental Factor Operating Non-Operating
Temperature 0 to +55° C -40 to +85° C
Vibration 0.01g ^2/Hz at 5-500 Hz
Random Vibration
Shock 20g 11 ms sine or saw
Air Flow 400 LFM at 0 to 55°C
Humidity 10-90% (non-condens-
ing)