Artesyn COMX-CAR-210 Installation and Use (August 2014) - Manual (Page 56)

Functional Description
COMX-CAR-210 Installation and Use (6806800L14D) 56
The board provides an LVDS and backlight headers. The LVDS header is a 40-pin, dual-row
header, while the backlight is a 5-pin wafer header.
For information on pin assignements, see LVDS on page 31
4.2.2 VGA
The carrier board supports VGA output from the COM Express connector.
For information on pin assignments, see Table "J5, VGA Connector Pin-out" on page 33
4.2.3 SDVO to DVI
The carrier board supports both PEG and SDVO functions. It has a jumper that can choose the
signal output from the COME connector.
For information on pin assignments, see Table "J5, DVI Connector Pin-out" on page 34
4.3 Audio
4.3.1 Audio Jack
The COMX-CAR-210 supports line output, microphone, input, line input, side surround
output, center & left, surrounding output using industry standard 7.1 channel audio-jack
connectors.
For information on pin assignments, see Table "J10, Audio Jack Pin-out" on page 34 .
4.3.2 Audio Header
The board provides two internal audio headers to support the following functions:
microphone input, stereo headphone output and stereo speaker output.