Using the reset buttons – ARRIS WTM652 User Guide User Manual
Page 71
Cable Modem Start Up Sequence
Using the Reset Buttons
Use the Router Reset button to reset the Ethernet and wireless connections with-
out affecting the cable or telephony connections. You may need to reset the router
if you are having problems connecting to the Internet, but the phones are working.
To reset the Telephony Modem to factory defaults, hold the Router Reset button
for about 8 seconds.
Use the TM Reset button to reset the modem as if you power cycled the entire
unit. The phones will be out of service until the Telephony Modem finishes recon-
necting to the cable system. You may need to reset the Telephony Modem if you are
having problems connecting to the Internet or with the phones. This button should
be used rarely.
The TM Reset button is recessed to prevent accidental resets. Use a pointed non-
metallic object to press this button.
The diagram to the left shows the location of the Reset buttons.
DS
US
Online
Link
Description
Flash
Off
Off
Off
Downstream search
On
Flash
Off
Off
Downstream found; upstream search
On
On
Flash
Off
Downstream and Upstream found;
retrieving setup information from
cable operator
Touchstone WTM652 Telephony Modem User’s Guide
71
Router Reset
TM Reset