Configuring wi-fi protected setup (wps) – ARRIS WTM652 User Guide User Manual

Page 41

Configuring Wi-fi Protected Setup (WPS)

Wi-fi Protected Setup (WPS) is a standard method for easily configuring a secure

connection between your WTM652 and computers or other wifi-capable devices

(known as enrollees). Follow these steps to use WPS to connect to the WTM652.

1 Click the Wireless Setup link in the navigation menu, then click Wi-Fi Pro-

tected Setup.
The Wi-Fi Protected Setup window appears.

2. Check the WPS Enable box in the WTM652 screen.
3 Use the appropriate connection method as described below:

a. If your client device has a “Wi-Fi Protected Setup” button: Press the but-

ton on the client device, then click the Simple Push Button button on the

WTM652 screen.. When the client indicates that it has configured suc-

cessfully, click the Save button in the WTM652 screen and refer to your

client device documentation for further instructions.

b. If your client device has a WPS PIN number: Check the WPS Enable

box in the WTM652 screen, and enter the client’s PIN in the Enrollee PIN

field on the WTM652 screen.

Touchstone WTM652 Telephony Modem User’s Guide