ARRIS WTM652 User Guide User Manual

Page 48

1 In the Telephony Modem, click the Wireless Setup link in the navigation

menu, then click Wireless Bridging.
The Wireless Bridging window appears.

2 Check the Enable Wireless Bridging box.
3 (recommended) If you want to specify which Access Points are allowed to

connect to your network, check the Enable ONLY Specific Access Points

to Connect box and enter the MAC address of each Access Point in the AP1

through AP4 fields. You can enter up to four Access Points.
Note: Most wireless devices have their MAC addresses printed on a label at-

tached to the back or bottom of the unit. Make sure you enter the wireless

(WLAN) MAC address; the Ethernet and WAN connections have different

MAC addresses.

4 Click the Save button to save your changes.

Touchstone WTM652 Telephony Modem User’s Guide