Configuring your wireless connection, Wireless, Configuration – ARRIS WTM652 User Guide User Manual
Page 29: Requirements, Configuration basics
2
1
3
29
Touchstone WTM652 Telephony Modem User’s Guide
Configuring Your Wireless Connection
The WTM652 ships with a basic factory default configuration that should allow you
to immediately access the Internet with a wireless connection. If your computer is
equipped with a 802.11b/g wireless LAN card, you may wish to configure the
WTM652 wireless settings. At a minimum, ARRIS suggests that you configure se-
curity settings.
Requirements
Make sure you have the following before attempting to configure your Ethernet con-
nection:
• Computer with:
— Ethernet interface or wireless interface
— Ethernet cable, if using Ethernet interface (supplied)
• Web browser
Configuration Basics
The WTM652 uses a web-based interface to configure wireless settings. The follow-
ing screen shows the various components of the interface.
1 Access bar: Shows the WTM652 connection status and provides the follow-
ing links:
• Home — returns to the Status page (shown above) from any screen.
• Help — displays help for the current screen.
• Login/Logout — allows access to screens other than the Status screen.
2 Navigation menu: Select any of the items in this list to display an associated
submenu. Selecting submenu items displays the associated screen. If you
are not logged in, the WTM652 displays the login screen before allowing you
to proceed.
3 Display area: Enter or view configuration information in this area. A ? link
may be available to explain the purpose of the screen or individual items on
the screen.