AMETEK SLM-1 - Manual (Page 29)

Sorensen SLM-1 Chassis GPIB/RS-232 Programming
symbol (nl); which stand for “new line” and represents ASCII code byte
the OA Hexadecimal or 10 decimal.
Semicolon ”;“ :The semicolon “;” is a back-up command, the semicolon allows you to
combine command statements on one line to create command
message.
Table 4-2 presents a summary of the GPIB/RS-232 Setting commands, and Table 4-3
summarizes the GPIB/RS-232 preset Query commands with applicable module types. Table
4-4 is a summary of State commands, the System commands are in Table 4-5, Measure and
Limit commands are in Table 4-6, and the Global commands are in Table 4-7.
M540070-01 Rev B 4-3