AMETEK SLM-1 - Manual (Page 14)

Features, Functions, Specifications Sorensen SLM-1 Chassis
1.2
FEATURES AND FUNCTIONS
The SLM chassis provides high performance, easy operation and a cost-effective
solution for power source testing. The features of the SLM-1 electronic load chassis
are:
• Plug-in design allows for easy replacement of different load modules as
applications change
• Flexible configuration allows the bay to accept any SLM-(single module) or
SLD-(dual) series load module
• The analog programming BNC input on the rear panel can control the load
module's load current with arbitrary waveforms (SLM DC modules) or
synchronization (SLM AC modules)
• RS-232 connector provides serial interface for remote control for easy
connection to a computer
• GPIB interface (option), one GPIB address can control the electronic load
module with set load status and read back meter capabilities.
1.3 SPECIFICATIONS
Specification details of the SLM-1 chassis are shown in Table 1-2.
LINE 100V/115V±10% 200V/230V±10%
AC INPUT FREQUENCY 50/60 HZ
FUSE 2A/250V (5x20mm) 1A/250V (5x20mm)
MAX. POWER
CONSUMPTION
40 W
DIMENSIONS (W*H*D) 5.9x7.0x17.5 in. (150x77x445 mm)
WEIGHT NET: 12.4 lbs. (5.5 kg)
Table 1-2 SLM-1 Chassis Specifications
1.4 REGULATORY COMPLIANCE
• Certified to UL 61010-1, CSA C22.2 No. 61010.1 and IEC/EN 61010-1
• CE Compliant:
o
Low Voltage Directive (73/23/EEC) using EN 61010-1, and
o
EMC Directive (89/336/EEC) using EN 61326
• FCC Compliant to 21 CFR, Subpart J.
1-2 M540070-01 Rev B