AMETEK SLM-1 - Manual (Page 20)

Configuration Sorensen SLM-1 Chassis
SLM
Figure 2-3 SLM-1 Chassis Rear Panel
2.2.2 RS-232C Connection
The RS-232C connector (female) on the rear panel connects the SLM-1 chassis to
the computer's RS-232C port.
2.2.3 Analog Programming BNC Input
The BNC connector on the rear panel connects the SLM-1 chassis to the SL-Series
analog programming input, the DC load module analog programming input, or to the
external sync input of SLM-Series AC load module.
2.3 MAINTENANCE
2.3.1 Cleaning
WARNING:
To avoid electrical shock or damage to the meter, do not get water inside
the case.
Periodically wipe the case with a damp cloth and detergent; do not use abrasives or
solvents.
2-4 M540070-01 Rev B