AMETEK SFA Series - Manual (Page 25)

SECTION 2
INSTALLATION
2.1 INSPECTION
Inspect the shipping carton for possible damage before unpacking the unit.
Carefully unpack the equipment. Save all packing materials until inspection is
complete. Verify that all items listed on the packing slips have been received.
Visually inspect all exterior surfaces for broken knobs, connectors, or meters.
Inspect for dented or damaged exterior surfaces. External damage may be an
indication of internal damage. If any damage is evident, immediately contact the
carrier that delivered the unit and submit a damage report. Failure to do so
could invalidate future claims. Direct repair issues to Customer Service at 1-
800-733-5427.
2.2 CONTENTS OF SHIPMENT
Depending on the model, configuration, and options available for your SFA
Series power supply, the ship kit may include additional parts and accessories.
At a minimum, the ship kit that accompanies your SFA Series power supply
includes the following items:
• AMETEK manuals CD-ROM, Part No. M550008-01 containing the
SFA Series DC Power Supplies Operation Manual Part No.
M550292-01 (this manual)
• Sense mating connector (Molex P/N 39-01-4031) with loose contacts
(Molex P/N 39-00-0182)
• J1 mating connector (Cinch P/N DB25P or equivalent) normally
shipped attached to rear panel J1
• Back shell for J1 (DB25) mating connector (Cinch P/N DCH-B-001 or
equivalent)
M550292-01 Rev G 2-1