AMETEK SFA Series - Manual (Page 20)

Sorensen SFA Series Overview
1.2 TECHNICAL SPECIFICATIONS
The following sections provide environmental, electrical, and physical
characteristics for the SFA Series power supplies.
Note: Specifications are subject to change without notice.
Note: The SFA Series power supplies are intended for indoor use only. Please
refer to Section 2.4 for use/location requirements.
1.2.1 E NVIRONMENTAL C HARACTERISTICS
Parameter Specification
Temperature Coefficient 0.03%/
°C of maximum output current rating for current set point.
Ambient Temperature
Operating 0 to 50
°C
Storage -25
° to 65°C
Cooling
Internal fans; vents on sides and rear. (Units may be stacked without
clearance above or below).
Humidity
95% maximum, non-condensing, 0 to 50
°C; 45°C maximum wet-bulb
temperature
Altitude
Operating full power available up to 5,000 feet (1,524m),
derate 10% of full power for every 1,000 feet higher
non-operating to 40,000 feet (12,192m)
1-2 M550292-01 Rev G