AMETEK HPD Series GPIB-Multichannel - Manual (Page 110)

106
Oper
ating
Manual
for Multichanne
l F
unctionality (
G
PIB-
M)
SCPI Command Re
fe
rence
SCPI C
o
mman
d Summary
Table B.3Commands for Output Control
Function SCPI Command Description Query
Set (Immediate) Current
Setpoint [[:]SOURce][]:CURRent[:LEVel][:IMMediate][:A
MPLitude] {|MAXimum|MINimum}
Change current setpoint Yes
Set Triggered Current
Setpoint [[:]SOURce][]:CURRent[:LEVel]:TRIGgered[:AMP
Litude] {|MAXimum|MINimum|DEFault}
Change triggered current setpoint Yes
Set (Immediate) Voltage
Setpoint [[:]SOURce][]:VOLTage[:LEVel][:IMMediate][:A
MPLitude] {|MAXimum|MINimum}
Change voltage setpoint Yes
Set Triggered Voltage
Setpoint [[:]SOURce][]:VOLTage[:LEVel]:TRIGgered[:AMP
Litude] {|MAXimum|MINimum|DEFault}
Change triggered votlage setpoint Yes
Set Voltage Slew Rate
Voltage [[:]SOURce][]:VOLTage:SLEW:STEP{
ltage>|MAXimum|MINimum|DEFault}
Sets the voltage slew rate voltage change
for the programmed time interval Yes
Set Voltage Slew Rate
Interval [[:]SOURce][]:VOLTage:SLEW:INTerval{
e-interval>|MAXimum|MINimum|DEFault}
Sets the voltage slew rate time interval for
the programmed voltage change Yes
Set Over Current
Protection Level [[:]SOURce][]:CURRent:PROTection[:OVER][:LEV
el] {|MAXimum|MINimum}
Set the over current protection level Yes
Set Over Current
Protection
Shutdown State [[:]SOURce][]:CURRent:PROTection[:OVER]:STAT
e
Select over current protection to
shutdown(ON) or set alarm (OFF) Yes
Query Over Current
Protection Tripped [[:]SOURce][]:CURRent:PROTection[:OVER]:TRIP
ped?
Query if over current protection mechanism
has tripped N/A
Set Under Current
Protection Level [[:]SOURce][]:CURRent:PROTection:UNDer[:LEVe
l] {|MAXimum|MINimum}
Set under current protection level Yes
Set Under Current
Protection
Shutdown State [[:]SOURce][]:CURRent:PROTection:UNDer:STATe Select under current protection to shutdown
(ON) or set alarm (OFF) Yes
Query Under Current
Protection Tripped [[:]SOURce][]:CURRent:PROTection:UNDer:TRIPp
ed?
Query if under current protection
mechanism has tripped N/A
Set Over Voltage
Protection Level [[:]SOURce][]:VOLTage:PROTection[:OVER][:LEV
el] {|MAXimum|MINimum}
Set the over voltage protection level Yes
Query Over Voltage
Protection Tripped [SOURce][]:VOLTage:PROTection[:OVER]:TRIPped
?
Query if over voltage protection mechanism
has tripped N/A
Set Under Voltage
Protection Level [[:]SOURce][]:VOLTage:PROTection:UNDer[:LEVe
l] {|MAXimum|MINimum}
Set under voltage protection level N/A
Set Under Voltage
Protection
Shutdown State [[:]SOURce][]:VOLTage:PROTection:UNDer:STATe Select under voltage protection to shutdown
(ON) or set alarm (OFF) Yes
Query Under Voltage
Protection Tripped [[:]SOURce][]:VOLTage:PROTection:UNDer:TRIPp
ed?
Query if under voltage protection
mechanism has tripped N/A
Set High Current Limit [[:]SOURce][]:CURRent:LIMit:HIGH
{|MAXimum|MINimum}
Set upper limit of current setpoint range (soft
limits) Yes
Set Low Current Limit [[:]SOURce][]:CURRent:LIMit:LOW
{|MAXimum|MINimum}
Set lower limit of current setpoint range (soft
limits) Yes