AMETEK HPD Series GPIB-Multichannel - Manual (Page 102)

SCPI Command Reference
IEEE-488.2/SCPI Syntax and Style
98 Operating Manual for Multichannel Functionality (GPIB-M)
IEEE-488.2/SCPI Syntax and Style
Parameters Units of Measure and Multipliers
The default units of measure include:
• V (Volt – voltage)
• A (Ampere – current)
• W (Watt – power)
• S (seconds – time)
The supported optional multipliers include:
• m (milli)
• k (kilo)
Note The SI standard for these multipliers is specifically lowercase, while the IEEE
standard specifies uppercase. Both combinations are supported.