AMETEK HPD Series GPIB-Multichannel - Manual (Page 108)

104
Oper
ating
Manual
for Multichanne
l F
unctionality (
G
PIB-
M)
SCPI Command Re
fe
rence
SCPI C
o
mman
d Summary
Table B.1IEEE 488.2 Commands
Function SCPI Command Description Query
Clear Status *CLS
[:]STATus[]:CLEar
Clears the status data structures. N/A
Standard Event Status
Enable Query *ESE?
[:]STATus[]:STANdard:ENABle
Query the Standard Event Status Enable
register settings. N/A
Standard Event Status
Enable *ESE
[:]STATus[]:STANdard:ENABle
Set the Standard Event Status Enable
Restier bits. N/A
Standard Event Status
Register Query *ESR?
[:]STATus[]:STANdard[:EVENt]?
Query Standard Event Status Register. N/A
Identification Query *IDN?
[:]SYSTem[]:IDENtify?
Query identification string. (Manufacturer’s
information.) N/A
Individual Status Query *IST? Reads the current state of the IEEE 488.1
defined "ist" local message in the device N/A
Operation Complete
Command *OPC Causes the device to generate the operation
complete message in the Standard Event
Status register when all pending delected
device operations have finished N/A
Query Opertion Complete
Command *OPC? Place and ASCII character “1” into the
output queue when all pending operations
have been finished. See IEEE 488.2-1992
section 12.5.3. N/A
Option Identification
Query *OPT?
[:]SYSTem[]:OPTion?
Identify reportable device options N/A
Parallel Poll Enable
Register Query *PRE? Query the Parallel Poll Enable Register
setting N/A
Parallel Poll Enable
Register Command *PRE Sets the Parallel Poll Enable Register bits.
See IEEE 488.2 section 11.6 for details. N/A
Recall *RCL
[:]SYSTem[]:RECall
Restores the settings of unit from values
stored in memory. N/A
Reset *RST
[:]SYSTem[]:RESet
Performs a device reset. Set the power
supply to a known state that is independent
of the use history of the device. N/A
Save User Settings *SAV
[:]SYSTem[]:SAVE[USER]
Stores the current setting of the device in
local memory. Scope is same as *RST N/A
Save Default Settings *SDS
[:]SYSTem[]:SAVE:DEFault
Save the factory default settings. N/A
Query Service Request
Enable *SRE?
[:]STATus[]:SREQuest:ENABle?
Query the Service Request Enable Register
bits. N/A
Service Request Enable *SRE
[:]STATus[]:SREQuest:ENABle
Set the Service Request Enable Register
bits. N/A
Read Status Byte *STB?
[:]STATus[]:SBYTe[EVENt]?
Read the status byte and Master Summary
Status bit. N/A