Zilog EZ80190 - Manual (Page 23)

eZ80190 Development Kit
User Manual
UM014108-0810 Operational Description
19
Almost all of the connectors’ signals are received directly from the CPU.
Four input signals, in particular, offer options to the application developer
by disabling certain functions of the eZ80190 Module.
These four inputs are:
37 SDA Bidirectional Yes
38 GND
39 FlashWE Output Low No
40 GND
41 CS3 Input Low Yes
42 DIS_IrDA Output Low No
43 RESET Bidirectional Low Yes
44 WAIT Output Pull-Up 10 K¾; Low Yes
45 V
DD
46 GND
47 HALT_SLP Input Low Yes
48 NMI Output Low Yes
49 V
DD
50 Reserved
Table 3. eZ80Acclaim!
®
Development Platform
I/O Connector Identification—JP2
1
(Continued)
Pin # Symbol Signal Direction Active Level eZ80F91 Signal
2
Notes:
1. For the sake of simplicity in describing the interface, Power and Ground nets are omitted from
this table. The entire interface is represented in the eZ80190 Module Schematic Diagrams on
pages 66 through 73.
2. The Power and Ground nets are connected directly to the eZ80F91 device.