Xtramus DApps-MPT V1.4 - Manual (Page 52)

52
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®
D. Log
– File Name Setting
Test results will be saved as log files and named automatically after tests are
completed. All log files’ names are consisted in the format as shown in the
figure down below:
DApps-MPT creates test result logs and stores these logs automatically to
folders named after the testing date. You can set the names that will be
applied to these folders and test result logs here in Log
– File Name Setting.
 Folder: You can set the name of the log folders as “Year, Month”, or
“Year, Month, Date”.

Prefix: You can input the prefix word for test result log names here.
 Suffix: You can set the suffix as Timestamp (the log file creating time),
Serial Number, and Bar Code (barcode).
E. Console Log/Control
In order for DApps-MPT to out put console port logs, you
have to make settings for the RS-232 port (Serial Port) by
clicking the Console Setting button. The Console Logs
will be stored in the same folder where test logs are
saved.