Xtramus DApps-MPT V1.4 - Manual (Page 341)

341
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®
E. Criteria
 Allowable Tolerance: You can set the allowable amount packet loss/excess here.

Total Packet Loss: If packet loss (including error packets) is higher then the value you set here,
the test result of the DUT will be fail.

Total Packet Excess: If packets excess (including error packets) is higher then the value you
set here, the test result of the DUT will be fail. Packet excess happens when packet
transmission is bad and packets are resend multiple times, causing the amount of received
packets is more than sent packets.