Xtramus DApps-MPT V1.4 - Manual (Page 39)

39
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®
7. DApps-MPT Overview
7.1. Hardware Installation
Before starting DApps-MPT, your PC and NuDOG-301C/NuDOG-801/NuDOG-101T shall be connected
properly. The figure down below illustrates connecting PC and NuDOG-301C. You can connect
NuDOG-801 and NuDOG-101T with PC in the same manner.
7.2. Starting DApps-MPT
Before starting DApps-MPT, the DUT, your PC, and NuDOG-301C/801/101T shall be connected as
shown in “7.1. Hardware Installation”.
You can start running DApps-MPT by:
 Click Start  Programs  NuStreams 
DApps-MPT.
 Double-click DApps-MPT icon located on
your PC’s desktop.