Vectronics VEC-131K User Manual
Page 16
VEC-131K Owner's Manual
Aircraft Receiver Kit
14
! ! 13. Locate the two 100 pF multilayer capacitors (marked “101”).
! ! 14. Install and solder a 100 pF multilayer at location C7.
! ! 15. Install and solder a 100 pF multilayer at location C14.
! ! 16. Locate the remaining multilayer capacitor. It should have a body
marking of “102”. This is a 1000 pF or .001 uF capacitor. Note that
there are four locations requiring a .001 uF capacitor, but only
location C13 requires the use of a multilayer style .001-uF capacitor.
! ! 17. Install and solder the .001 uF multilayer capacitor at location C13.
! ! 18. Locate the three .001-uF disc ceramic capacitors. They are marked
“102”.
! ! 19. Install and solder a .001 uF disc ceramic at location C8.
! ! 20. Install and solder a .001 uF disc ceramic at location C15.
! ! 21. Install and solder a .001 uF disc ceramic at location C17.
! ! 22. Find the 220 pF disc ceramic capacitor. The body is marked “221”.
! ! 23. Install and solder the 220 pF disc ceramic at location C24.
! ! 24. Find the seven .01 uF disc ceramic capacitors (marked “103”).
! ! 25. Install and solder a .01 uF disc ceramic at location C9.
! ! 26. Install and solder a .01 uF disc ceramic at location C16.
! ! 27. Install and solder a .01 uF disc ceramic at location C19.
! ! 28. Install and solder a .01 uF disc ceramic at location C20.
! ! 29. Install and solder a .01 uF disc ceramic at location C21.
! ! 30. Install and solder a .01 uF disc ceramic at location C27.
! ! 31. Install and solder a .01 uF disc ceramic at location C29.
! ! 32. Find the five .1 uF disc ceramic capacitors (marked “104”).
! ! 33. Install and solder a .1 uF disc ceramic at location C10.
! ! 34. Install and solder a .1 uF disc ceramic at location C22.
! ! 35. Install and solder a .1 uF disc ceramic at location C30.
! ! 36. Install and solder a .1 uF disc ceramic at location C32.
! ! 37. Install and solder a .1 uF disc ceramic at location C35.
The following component is not a capacitor, but this is a good time to install it.