Tempest Tornado - Manual (Page 40)

Tornado Enclosure User Manual page 40
Shorter Luminaires Requiring Bracket Standoffs
In order to align the center of the luminaire correctly in the Tornado enclosure, some fixtures need the
Fixture tray to be raised. This is done with tubular standoffs that insert between the Fixture Tray and
the enclosure Base. The installation procedure is the same as for any of the above, except that the
fixture standoffs must be inserted when the Fixture Tray is remounted.
If the fixture you specified when you ordered your Tornado enclosure requires bracket standoffs, they
will have been supplied. If none are supplied, your fixture does not require them.
Diagram – Fixture Tray Standoffs
Fixture
Tray
Tubular
Standoff
Use longer
bolt
provided
to fix
down to
enclosure
base