Tempest Tornado - Manual (Page 16)

Cyclone Enclosure User Manual page 16
Installation above public Spaces
If the Tornado enclosure is to be installed above an area accessible to the public (eg a street or an
auditorium), some jurisdictions require a safety bond to be installed.
A stainless steel eyebolt is included with base-up and horizontal versions, and should be installed
as follows:
1. Remove one of the four bolts holding the Unistrut onto the enclosure base
2. Replace it with the eye bolt, washer and nut supplied, and screw down tight
Safety Bond
Use a suitably-rated steel wire rope, threaded through the eyebolt, and
attach securely to a structural member, in accordance with local safety
regulations.