Tempest Tornado - Manual (Page 32)

Tornado Enclosure User Manual page 32
STATUS DISPLAY
View current status information, using the arrow keys to scroll through:
a) Humidity – relative humidity in %
b) Air temperature, in degrees C or F
c) PCB temperature (this will usually be significantly higher than air temperature)
d) Voltage – line Voltage reaching the DEC
e) Current being drawn by luminaire/light, in Amps
f) Lamp Hours elapsed since last reset
g) Firmware version
RDM Monitoring and Configuration
All the features accessible over the DEC3.3 control panel are
also available over RDM. Just how this information is displayed
will depend on the RDM interface used. These screen shots
were taken running the GetSet program in Windows 7, and
connecting to a DEC3.3 controller using a RDM TRI MK1
interface, Tempest part # 2000.190
GetSet gives you a powerful RDM front end suite, with Tempest-specific functions and displays.