Firmware upgrade over rdm – Tempest Tornado User Manual
Page 33
Tornado Enclosure User Manual
page
33
This view shows a single
DEC3.2 test unit that has been
correctly discovered and
labeled by the GetSet software
suite, and a log of RDM
messages.
This RDM interface provides a
graphic view of the various
sensor functions supported by
DEC3.2 and up
Important:
Check that your RDM interface
vendor has tested his interface
with Tempest enclosures and
all other RDM devices you plan
to use on the same network.
Firmware Upgrade over RDM
DEC3.3 firmware
is field-
upgradeable,
using RDM. A field
upgrade requires a
JESE RDM TRI MK1
interface to be
connected to the
DMX network on
which the DEC3.3
is located, and the
use of JESE GetSet
software. The kit
is available from
Tempest under
part # 2000.190.