Planning, Mounting – tornado 1900-1950 – Tempest Tornado User Manual
Page 11
Cyclone Enclosure User Manual
page 11
Planning
Snow clearance:
Enclosure must be powered 24/7/365.
Warning: This installation cannot be safely completed by 1 person.
Mounting – Tornado 1900-1950
Each Enclosure must be wall, floor or ceiling mounted with the two stainless steel
brackets provided.
Tempest Lighting recommends only stainless steel
mounting hardware for permanent installation
outdoors.
Floor, Wall or Ceiling Mounting
Use the two stainless steel mounting brackets provided
with the Tornado 1900/1950.
Fix the holes in the bracket feet to a secure structure using
3/8” [M10] stainless steel hardware (not supplied).
Pole Mounting
To mount to the top of a pole, fabricate a plate
with four 0.434”/11mm holes and weld to the top
of your pole. Use these dimensions:
MINIMUM
24”/60c
m
6”
[152mm]
Wiring Hole
15.5”
[394mm]