Tempest Tornado User Manual
Page 37
Tornado Enclosure User Manual
page
37
Luminaires with Omega Clamps
This applies to most luminaire types:
1. Remove the Fixture tray from the enclosure, as shown above.
2. Mount the Omega clamps securely onto the fixture base. Make sure that the fasteners lock
positively in place.
3. Bolt the clamps to the fixture tray, using the Omega Clamp Spacers and the bolts provided.
CHECK THAT THE FIXTURE IS CENTERED ON THE FIXTURE TRAY.
4. Replace the fixture tray/fixture assembly in the enclosure, and bolt firmly in place.
Diagram – Mounting with Omega Clamps and Clamp Spacers
Fixture Tray
Omega clamp –
orientation may
vary
Fixture
Tray Bolts
Bolt clamp
in place
from below
Omega
Clamp
Spacer