TEKVOX TekTouchPad - Manual (Page 9)

TekTouchPad Configuration User’s Guide
9
TEKVOX, Inc.
www.TEKVOX.com
ASCII
The ASCII checkbox allows commands to be displayed in ASCII format. Un-checking
this box defaults to a Hex format display.
Add Feedback
The “Add Feedback” button presents another
dialog, Figure 3, for creating feedback strings to
compare against, and perform the selection action.
These actions are:
 Pressed – the button assumes a pressed
state without executing assigned commands
 Released – the button assumes a released state without executing assigned
commands
 Flashing – the button goes into a flashing state until another command is
received or executed.
This function is primarily used to reflect actions taken directly on external devices by
users and provide appropriate feedback as to the current state of the controlled device.
As an example, if the match pattern were set to “HDMI 3” and action set to “Pressed”,
the touch pad will listen on the communications line for a serial string sequence
containing “HDMI 3”. If detected, the touch pad would then place the button associated
with the feedback pattern in a pressed visual state.
Each defined feedback string-command pair is inserted into the Feedback List of the
Command Editor window. Right clicking in the Feedback List area of the Command
Editor window also provides a context menu for feedback commands, the menu items
are:
 Add – generates feedback dialog for adding feedback commands into the
Feedback List
 Edit – generates feedback dialog for editing feedback commands in the
Feedback List
 Delete – deletes the selected feedback command in the Feedback List
Double clicking on any feedback command in the Feedback List generates the feedback
dialog for editing the feedback item selected.