TEKVOX TekTouchPad User Manual
Page 41
TekTouchPad Configuration User’s Guide
41
TEKVOX, Inc.
This error indicates that the requested port is already in use by some other application. Select
another port utilizing the Host Com Settings menu option.
This error indicates that the system was not able to communicate with the unit. Check cabling
and Host Com Settings to make sure the operational rates are set correctly.
Note: This is an operational rate failure, and has nothing to do with load rates.
This error indicates that the operational rate negotiations passed, but the load rate transactions
failed. This is usually caused by a load rate com settings mismatch. Make sure the Loader
settings in the Host Com Settings is set to 115200 baud, no parity, 8 data bits, and 1 stop bit.